DPI705數字壓力指示計

品牌：GE(DRUCK) 德魯克     產地：英國

全國總“經銷和銷售"，謝謝您：深圳市午夜性爱福利電子科技有限公司

以下提供的產品資料為全英版，如果您需要中文參考資料，請跟我司，敬請諒解。

DPI705數字壓力指示計 DPI 705 - Digital Pressure Indicators

Compact， robust and lightweight， the DPI 705 Series of digital handheld pressure indicators are designed for single handed operations and provide many essential features required for routine maintenance and system troubleshooting. New materials and technical innovations from over fifteen years experience with portable pressure testers have resulted in this advanced new product. Intrinsically safe (I.S.) versions are available certified to European and American standards for use in hazardous areas.

Features

• Ranges 0 to 70 mbar (1 psi) through to 700 bar (10，000 psi)

• 0.1% full scale (FS) accuracy

• Rugged， lightweight handheld design

• Leak test， tare， max/min and filter

• Intrinsically safe version

• Optional pneumatic and hydraulic hand pumps

DPI 705 

• Impact resistant， sealed to Type 12/IP54

• Clear high resolution LCD

• Optional carrying case with belt loop

• Long battery life

• Integral desk stand and hanger Improves Test Efficiency • No warm up time

• 14 pressure units

• One minute leak test  DPI705數字壓力指示計

• Ambient temperature measurement The calibration tools required to comply with quality assurance programs such as ISO9000 put ever increasing demands on maintenance budgets. The DPI 705 Series， used in conjunction with pneumatic or hydraulic pressure generators， is a simple， low cost solution complementing the wide range of Druck portable process calibrators.

Special Features Pressure Units psi， inHg， inH2O (4°C， 20°C and 60°F)， ftH2O (4°C， 20°C and 60°F)，mmHg， mHg， mbar， bar， mH2O， Pa， hPa， KPa， MPa， Kgf/cm2 Calibration Units mbar， bar， psi， kPa， mPa， hPa， Kgh/cm2 Leak Test Standard 60 second leak test

Media Compatibility 

• Internal sensor： stainless steel， except positive differential non-corrosive fluid and negative differential dry gas.

• Remote sensor： stainless steel， except negative differential non-corrosive fluid. Safety Conformance EN61326-1， CE marked Intrinsically Safe Version

• IS Class I， Groups A， B， C & D， T4 Exia; Class I， Zone 0， AEx/Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +50°C) to CSA Std. 157-92， UL 913 (7th Ed.)， CAN/CSA-C22.2 No. 60079-0：11， CAN/CSA-C22.2 No. 60079-11：11， ANSI/ UL 60079-0：09 and ANSI/UL 60079-11：09.

• Ex ia IIC T4 Ga (-10°C ≤ Ta ≤ +50°C) to ATEX IEC 60079-0：2011 and EN 60079-11：2012

該產品由深圳市午夜性爱福利電子科技有限公司提供，銷售商地址位於深圳市南山區前海路振業國際商務中心1206。請您仔細閱讀產品使用說明書，正確使用。

如果想試用該產品，請以下單位：

午夜性爱福利電子主要銷售通信設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。