Fluke e-dwt-h電子自重測試儀的詳細資料
Fluke e-dwt-h電子自重測試儀
The E-DWT-H has the operational versatility to calibrate and test a broad range of pressure measuring instruments including：
- Analog gauges
- Transducers
- Calibrators
- Sensors
- Transmitters
AutoTest™ lets E-DWT operators quickly define test points and adjust all of the range-dependent settings with a single function.
The resolution and stability test used by the RPM4-E-DWT are set according to the range of the device under test. The upper limit setting is also set and provides range-based warnings and overpressure protection. While running AutoTests， the operator is prompted to set each sequential test point and test data is stored in the RPM4-E-DWT for recall or download. Typical test setup is quick and easy， but more complex tests can also be stored and reused.
Deadweight tester performance with digital measurement convenience
E-DWT-H offers precision， low measurement uncertainty and the stability over time of a conventional deadweight tester without the inconveniences associated with the piston-cylinders， weights， hand pumps， and interconnecting plumbing. Fluke e-dwt-h電子自重測試儀
- No weights to load and unload or regularly send out for calibration
- No need to know and correct for local gravity or ambient temperature
- No piston-cylinder changes; switch Q-RPT ranges in seconds
- Not sensitive to level or vibration
- Able to set and read any pressure value exactly， no minimum increment limited by smallest available masses
- Operates in any unit of measure while deadweight tester is typically limited to the pressure unit stamped on the mass
- Perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it， such as analog gauge calibration
- On-board， AutoTest calibration routines and data acquisition
- Interfaceable with a PC or laptop to allow for automated data acquisition
- Two year calibration interval supported at measurement uncertainty of ± 0.025% of reading.
- Easily recalibrated without crossfloating. Automated calibration of E-DWT-H is possible using COMPASS® for Pressure software.
E-DWT-H breaks new ground， improving the hydraulic pressure calibration process. E-DWT-H is an electronic calibrator designed to replace mechanical， piston-cylinder and weight based deadweight testers. It’s a lighter， easier-to-use deadweight tester alternative that is at home in the lab or instrument shop， as well as in the field performing in-situ calibrations and tests. This complete hydraulic pressure calibration system combines the convenience and precision of continuous， realtime electronic pressure measurement with the simple and direct operation of high quality operator controlled pressure generation hardware. E-DWT-H one year measurement uncertainty is ± 0.02% of reading with ranges up to 30，000 psi. It can be configured to provide this uncertainty from its full scale down to 1% of its range. Built-in pressure generation and control hardware allow the operator to fill and prime the system under test and generate and precisely adjust pressure throughout the range with ease.
- One-year measurement uncertainty is ± 0.02% of reading from 10% to 100% with one Q-RPT， and from 1% to 100% with two Q-RPTs
- Low torque variable volume allows for pressure generation up to 200 MPa (30，000 psi) with minimal physical effort
- Separate fine adjustment tool for maximum， superfine control resolution
- User defined resolution and ready limits enable user to optimize performance based on DUT specifications
- High pressure isolation valve and pressure relief valve protect the low pressure reference transducer from over pressure when high pressure reference transducer is active
|
Ease of use
- AutoRange feature optimizes measurement and safety features for the specific range of the instrument being calibrated
- Simple rezeroing while vented at atmospheric pressure
- Simple， objective pressure “ready/not ready indicator with user adjustable criteria to ensure repeatable results among operators
- Not dependent on local gravity or ambient temperature
- Sets and reads any pressure value directly in any unit of measure， without moving weights
- Built-in priming system to fill system with test fluid and purge unwanted air to assure smooth operation
- Optional foot switch accessory allows hands-free data collection when running AutoTests
| General | | Power requirements | | | To RPM4-E-DWT： 12 V dc 1.2 A | | | To AC to DC power supply： 100 V ac to 240 V ac， 50/60Hz |
| | Temperature range | | | Storage： -20°C to 70 °C | | | Operating： 10 °C to 40 °C |
| | Relative Humidity | | | Storage： 0% to 100% | | | Operating： 0% to 70% |
| | Weight | | | 1 Q-RPT： 12kg(26 lb) approximate | | | 2 Q-RPT： 14kg(30 lb) approximate |
| | Dimensions | | | E-DWT footprint： 41.4 cm Wx37.1 cm D (16.3 inx14.6 in) | | | E-DWT height： 26.9 cm (10.6 in)， 33.6 cm (13.2 in) to max variable volume handle height |
| Pressure ranges
Dependent on Q-RPT(s) included in RPM4-E-DWT. | | | 200 MPa (30，000 psi) maximum with standard variable volume | | | 100 MPa (15，000 psi) maximum with high volume (-HV) variable volume |
| | Operating medium | | | Delivered filled with oil (di-ethyl-hexyl sebacate) or dry | | | Standard E-DWT-H compatible with Sebacate， silicon oils， propylene glycol， fully fluorinated liquids， partially fluorinated liquids， isopropyl alcohol ， and distilled water. Option for Skydrol or mineral oil preparation. |
| | Reservoir capacity | | | Variable volume displacement | | | Standard： 3 cc (0.18 in3)， 200 MPa (30，000 psi) maximum | | | High： 7 cc (0.43 in3)， 100 MPa (15，000 psi) maximum |
| | Filling and priming pump displacement | | | TEST pressure connection | | | DH500 female. | | | Note： DH500 is a gland and collar type fitting for 6mm (1/4 in) coned and left hand threaded tubes equivalent to AE F250C， HIP HF4， 9/16-18 UNF， etc.. |
| | Pressure Limits | | | Maximum Working Pressure： | | | Range of RPM4-E-DWT monitor’s Hi Q-RPT 200 MPa (30，000 psi) with standard variable volume | | | 100 MPa (15，000 psi) with high volume variable volume | | | Maximum priming pump pressure： 700 kPa (100 psi) | | | Maximum Working Pressure： | | | with Lo Q-RPT selected： Range of RPM4-E-DWT monitor’s Lo Q-RPT |
| | communication ports： | |
| Pressure measurement | | Warm up time | | | 15 minute temperature stabilization recommended from cold power up. |
| | Normal Operating Temperature Range | | | Resolution | | | Default： 0.01% of active range | | | User adjustable to 1 ppm of Q-RPT maximum or 10 ppm of active AutoRange， whichever is larger |
| | Precision1 | | | ± 0.018% of reading or 0.0018% of Q-RPT span， whichever is greater |
| | Predicted Stability2 | | | One year： ± 0.0075% of reading | | | Two year： ± 0.015% of reading |
| | Measurement Uncertainty3 | | | One year： ± 0.02% of reading or 0.002% of Q-RPT span， whichever is greater | | | Two year： ± 0.025% of reading or 0.0025% of Q-RPT span， whichever is greater |
|
|
午夜性爱福利電子主要銷售通信設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。有多功能多產品校準器、電能功率校準器、活塞式午夜干逼视频APP软件(氣體、高壓、液體、真空)、多功能電氣安全校準器、示波器、頻率計、萬用表、阻抗午夜人妻一色、功率計、LCR數字電橋、音頻午夜人妻一色、電容測試儀、電感測試儀、安規測試儀、直流電阻測試儀、網絡午夜人妻一色、頻譜儀、任意波形發生器、溫度校準儀、數字測溫儀、信號發生器、電源、電子負載、綜合測試儀、信號源、濾波器測試儀、材料試驗機、溫度傳感器、熱像儀、變壓器測試儀、噪聲源、視頻午夜人妻一色、過程校準儀、溫度巡檢儀、超級測溫電橋、黑體爐、射頻導納物位開關、多點物位開關、音叉開關、射頻導納連續物位計、雷達液位計、超聲波液位計、油中水含量午夜人妻一色、液位測量係統、磁致伸縮液位計、非接觸固體雷達、壓力傳感器、過程表、壓力變送器、氣動控製器、高純壓力開關、隔膜片、衝液表、計量表膜片密封、材料實驗機、食品質構儀、硬度實驗機、數字測力計、PETPLUS特性粘度儀、布氏光學掃描係統、洛氏布硬度實驗機、全自動顯微硬度試驗機、布氏硬度試驗機、電動試驗平台、單柱材料試驗係統、雙柱材料試驗係統、浮球活塞午夜干逼视频APP软件、船用溫度壓力校驗儀、點位測量係統、超聲波開關、油/水界麵開關、在線流體檢測開關、多點開關、平板開關、浮頂罐溢出保護開關、靜電放電幹擾模擬器、雷擊浪湧幹擾模擬器、周波跌落模擬器、輻射抗擾度係統、脈衝群幹擾模擬器、傳導抗擾度測試係統、傳導騷擾測試係統、輻射騷擾測試係統等儀器。
溫馨小貼士：請您仔細閱讀產品使用說明書，正確使用本產品。
公司：深圳市午夜性爱福利電子科技有限公司
地址：深圳市南山區前海路振業國際商務中心1206
3183402039